Dinamap Pro 100V2 Manual de Serviço Página 68
- Página / 104
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
4-16 PRO 100-400 V2 Patient Monitor Service Manual Revision A
2009829-001
Calibration & Maintenance: SECTION 4. GENERAL MAINTENANCE
4.6. PRE-SERVICE TEST PROCEDURES
The following procedures can be used to check the primary functions
of the PRO Monitor before releasing the unit for clinical service.
The Monitor is tested by applying various stimuli to the sensor
interfaces or by measuring of specific parameters. The test
procedures employ features of the operational software and test
modes of the service menus.
A guide to the Monitor controls, indicators, and connectors is in
Section 2 of the PRO Monitor service manual.
Test Equipment
1. Digital Pressure Gauge 0-375mmHg, 0.2% accuracy, Digitron
P200L or similar.
2. NELLCOR
®
SpO
2
Simulator Model BIO-TEK INDEX 2 MF or similar
for Nellcor SpO
2
or equivalent.
3. Biotek SpO
2
Simulator for Masimo
®
SpO
2
or equivalent.
4. NIBP Calibration Kit P/N 320246, or similar.
5. IVAC
®
Probe Simulator TE 1811.
Test Conditions
Testing shall be conducted with an ambient temperature of 25 °C ± 5
°C (77 °F ± 9 °F).
4.6.1. SpO
2
Checks (PRO 300 & 400)
For Monitors equipped with Nellcor SpO
2
On occasion when testing the integrity of the Nellcor oximetry system,
abnormal results may occur when introducing large changes in the
pulse rate and/or pulse amplitude. Extreme changes in rate sent to
the Nellcor sensor by the SpO
2
simulator may cause the SpO
2
algorithm to completely miss finding the pulse rate.
This is an expected result. To work around this, incrementally step up
or down the settings on your SpO
2
simulator and allow the Monitor to
detect and display the new pulse rate or saturation.
Nellcor recommends use of the SRC-MAX Portable Tester for use
with PRO Monitors equipped with the Nellcor SpO
2
system.
For Monitors equipped with Masimo SpO
2
Masimo recommends BIO-TEK SpO
2
simulators.
- PRO Series 100 - 400 V2 1
- Service Manual 1
- PRO 100-400 V2 3
- Patient Monitor 3
- PRO 100-400 Patient Monitor 5
- Table of Contents: 10
- 1 Introduction 11
- For your notes 12
- Table of Contents 13
- 2009829-001 14
- Section 1. INTRODUCTION 15
- 1.2. ADDENDA 16
- 1.4. SERVICE POLICY 16
- 1.5. EXTENDED WARRANTIES 16
- 1.6. ASSISTANCE 16
- 1.7. SERVICE 17
- 1.9. WARNINGS AND PRECAUTIONS 18
- 1.10. SYMBOL DEFINITIONS 19
- 2 Product Description 23
- Product Description: 26
- 2.1. INTRODUCTION 27
- 2.2. PRODUCT CONFIGURATIONS 27
- 2.5. COMPATIBLE PARTS 32
- 2.6. SPECIFICATIONS 34
- 2.6.3. Mechanical 35
- 2.6.4. BP 35
- 2.6.5. TURBO TEMP 36
- 2.6.6. SpO 36
- Nellcor Patents 37
- Masimo Patents 39
- 3 Theory of Operation 41
- Theory of Operation: 44
- 3.1 INTRODUCTION 45
- 3.2.4 Host Communication Port 46
- 3.3 FUNCTIONAL DESCRIPTION 47
- 3.3.4 SPO2 PWA (Optional) 48
- 3.3.6 LCD Assembly 49
- 3.3.7 Printer PWA w/Printer 49
- 4 Calibration & 53
- 4.1 INTRODUCTION 57
- 4.2. FUSES 57
- 4.3. PERIODIC MAINTENANCE 57
- 4.3.2. Power Up Checks 58
- 4.3.5. Checking Calibration 59
- 4.4 Clinician Mode 60
- 4.4.3. Clinician More... Menu 62
- 4.5. SERVICE MODE 63
- 4.5.2 Service Mode Main Menu 64
- 4.5.3. NIBP Menu 65
- 4.5.4. System Menu 66
- 4.6.1. SpO 68
- Checks (PRO 300 & 400) 68
- 4.6.2. Leak Test 69
- 4.6.3. NIBP Calibration Check 70
- 4.6.7. Printer Test 73
- plug with the 77
- 5 Schematics & Drawings 79
- Field Replaceable Parts 82
- Description Part Number 85
- PRO 100-400 Assembly Drawing 87
- Front Case Drawing 87
- Shown with Temp Assembly 87
- Page 1 of 3 87
- Page 2 of 3 88
- Shown with Masimo Board 89
- Page 3 of 3 89
- Rear Case Drawing 90
- Page 1 of 4 90
- Page 2 of 4 91
- Pnuematic Assembly Drawing 92
- Page 3 of 4 92
- Pneumatic Hose Routing 93
- Page 4 of 4 93
- Sheet 1 of 9 94
- Sheet 2 of 9 95
- Sheet 3 of 9 96
- Sheet 4 of 9 97
- Sheet 5 of 9 98
- Sheet 6 of 9 99
- Main Board Assembly 100
- P/N: 2008238-001 C 100
- Sheet 7 of 9 100
- ISOLATED POWER SUPPLY 101
- HOST INTERFACE CONNECTOR 102
- SPO2 PATIENT CONNECTOR 102
- SPO2 MODULE CONNECTOR 102
- 2009829-001 A 104
Manuais e produtos relacionados com Medição, teste e controlo Dinamap Pro 100V2
(108 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.080 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais